Air transportation safety investigation A14W0177

The TSB has completed this investigation. The report was published on 6 April 2016.

Table of contents

    Right main landing gear collapse
    Jazz Aviation LP (dba Air Canada Express)
    DHC-8-402, C-GGBF
    Edmonton International Airport
    Edmonton, Alberta

    The occurrence

    The Jazz Aviation LP (doing business as Air Canada Express) Bombardier DHC-8-402, registration C-GGBF, serial number 4433, operating as flight JZA8481, departed from Calgary International Airport (CYYC) with an intended destination of Grande Prairie, Alberta. During the takeoff roll, the number 3 tire of the main landing gear failed. The flight was diverted to Edmonton International Airport (CYEG); aircraft rescue and firefighting equipment was standing by for the landing on Runway 02. On touchdown at 2030 Mountain Standard Time, the right main landing gear collapsed. Upon contact with the ground, all of the right-side propeller blades were sheared, and 1 blade penetrated the cabin wall. The aircraft came to a stop off the right (east) edge of the runway surface. Passengers and crew evacuated using all 4 exits. Three passengers sustained minor injuries. There was no post-accident fire. The accident occurred during the hours of darkness.


    Media materials

    News release

    2015-08-13

    Excessive vibrations from a failed tire contributed to November 2014 landing gear collapse in Edmonton, Alberta
    Read the news release

    Deployment notice

    2014-11-06

    TSB deploys a team of investigators to a landing incident at the Edmonton International Airport, Alberta

    Edmonton, Alberta, 6 November 2014 - The Transportation Safety Board of Canada (TSB) is deploying a team of investigators to the Edmonton International Airport to assess a landing incident involving a Jazz Dash 8-400 aircraft. The TSB will gather information and assess the occurrence.


    Investigation information

    Map showing the location of the occurrence

    A14W0177

    Right main landing gear collapse
    Jazz Aviation LP (dba Air Canada Express)
    DHC-8-402, C-GGBF
    Edmonton International Airport
    Edmonton, Alberta

    Investigator-in-charge

    Image
    Photo of Barry Holt

    Barry Holt has been an air safety investigator at the Transportation Safety Board of Canada (TSB) since 2001. He has been investigator-in-charge on over 300 class 5 and 20 class 3 investigations in the Western Region, and was part of the technical team that investigated the collision with water of the Cougar Helicopters' Sikorsky S-92A (A09A0016) off the coast of Newfoundland in 2009.

    Before that, Mr. Holt spent 15 years in the field as an aircraft maintenance engineer, mostly in remote and/or northern locations, on light and heavy helicopters. Previously, he had been a hoist operator for search and rescue activities and a senior helicopter maintenance engineer for the Canadian Coast Guard, and also worked at Transport Canada in the Enforcement Branch for a short time.


    Photos

    Click on the images to see them in full size.


      Download high-resolution photos from the TSB Flickr page.

    Class of investigation

    This is a class 3 investigation. These investigations analyze a small number of safety issues, and may result in recommendations. Class 3 investigations are generally completed within 450 days. For more information, see the Policy on Occurrence Classification.

    TSB investigation process

    There are 3 phases to a TSB investigation

    1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
    2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
    3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

    For more information, see our Investigation process page.

    The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.